Kitchen Sink FAQ
Find answers about kitchen and prep sink selection, sizing, installation, accessories, and care.
Sink Types & Selection
Akicon offers farmhouse apron-front, undermount, and drop-in kitchen sinks, plus compact bar and prep sinks. Depending on the model, you can choose a single or double bowl or a workstation with a ledge for fitted accessories. Start by choosing the installation style that fits your countertop and cabinet, then narrow your options by bowl layout, material, and finish.
A farmhouse sink has an exposed apron at the front, so the sink base generally needs an apron opening and dedicated support. An undermount attaches below the countertop, leaving the countertop edge visible around the bowl. A drop-in sink fits into a cutout from above, with its rim resting on the counter. Check the model's installation drawing before choosing a cabinet or cutting the countertop.
A single bowl gives you one uninterrupted space for baking sheets, stockpots, and large pans. A double bowl lets you separate tasks, such as soaking dishes on one side and rinsing produce on the other. For a divided sink, check each bowl's usable dimensions and the divider height to make sure your largest cookware will fit the way you want to use it.
A workstation sink has an integrated ledge that supports fitted accessories over the bowl. A compatible cutting board, colander, or drying rack can turn the sink into a prep or cleanup area without taking up nearby countertop space. Check the product listing for the specific accessories included and the dimensions of the ledge.
A primary kitchen sink is typically sized for everyday dishwashing and large cookware. A bar or prep sink has a smaller footprint and works well on an island, in a wet bar, or as a second sink for rinsing produce and glassware. Compare the inside bowl dimensions and drain clearance, especially if a compact sink will be your only basin.
Dimensions & Configuration
Start with the sink model's minimum cabinet width, then measure the clear space inside your cabinet between side panels and supports. Check the sink's overall width, flange clearance, bowl depth, and room for drain plumbing or a disposal. For an apron-front sink, also compare the apron width and height with the planned cabinet opening.
Measure the inside cabinet width and depth, the countertop depth, and the space between the planned sink and the backsplash. For a replacement, record the existing cutout, including its corner shape, and note where the drain and faucet are located. Compare those measurements with the exact model's drawing, and have your installer confirm the cutout before any countertop or cabinet work begins.
A deeper bowl gives tall cookware more clearance and helps contain splashes. A shallower bowl keeps the bottom easier to reach and leaves more room for plumbing and storage. Consider how high your countertop sits, how far you comfortably reach into the bowl, and whether the trap or disposal will fit below. On an undermount sink, account for the countertop thickness when judging your reach.
Yes, select made-to-order sinks can be configured to suit your cabinet and how you work. Share the required outside dimensions, desired bowl sizes and depths, and whether you want a single or divided bowl. Akicon can review what is feasible for the selected style and confirm the configuration on a drawing before production.
For eligible custom sinks, you can request a drain position and, on designs with a faucet deck, a faucet hole layout. An undermount sink without a faucet deck normally uses holes in the countertop instead. Provide the faucet and accessory specifications, along with any plumbing constraints, so the locations can be confirmed before fabrication or countertop drilling.
Materials & Finishes
Akicon offers handcrafted copper kitchen sinks and stainless steel kitchen sink options. Material, texture, and finish choices depend on the sink model and whether it is made to order. Check the individual listing for the base material, surface treatment, and available finishes before comparing care requirements or ordering samples.
Copper brings warm tones and can develop a changing patina when the surface is unsealed. Stainless steel has a more uniform appearance and is available in finishes such as brushed steel, though it can still show scratches or mineral spots. Choose based on the look you prefer and how you want the surface to age, then follow the care instructions for the exact finish.
Smooth copper has an even surface that makes the shape and color of the basin more prominent. Hammered copper has a hand-worked texture that reflects light unevenly and can make minor marks less noticeable. Texture and color are separate choices, so confirm whether the finish you want is available on your preferred texture.
Unsealed copper gradually changes color as it reacts with air, moisture, and everyday use. Areas that see more water, handling, or contact with acidic foods may age at a different rate. A sealed finish slows this change and helps preserve the original appearance while the coating remains intact.
Yes. Depending on the model, options can range from brighter natural copper to antique or darker tones. Where offered, you may also be able to choose a texture or a sealed finish. Review a finish sample in your kitchen lighting and confirm the color, texture, and seal on the order before fabrication.
Installation & Compatibility
Installation depends on how the model is designed to mount. A drop-in rim rests on the countertop, an undermount uses support beneath the countertop, and an apron-front sink generally needs a cabinet opening and support sized for the sink. Have your installer review the exact sink drawing, countertop material, cabinet support, and mounting instructions before cutting or securing anything.
Sometimes. The existing cabinet must have enough interior width and depth, and the front usually needs to be opened or modified for the apron. A cabinetmaker or installer should confirm that the cabinet can support the filled sink and that the doors, plumbing, and countertop will still clear the new basin. Have them check the actual model before ordering.
Depending on the model, an installer may need to adjust internal bracing or add a support frame. They should also check that the sink body, ledge, faucet hardware, and drain or disposal clear cabinet rails, drawers, and organizers. An apron-front workstation may need additional front-panel work. Review these dimensions before removing any structural cabinet parts.
A 3-1/2-inch opening is common for full-size kitchen sinks and is the nominal size of Akicon's listed 3-1/2-inch disposal flange. Check the opening on the exact sink drawing before ordering a strainer or flange, especially for compact bar sinks or custom configurations. The sink opening and the drain assembly's visible top diameter are different measurements.
A disposal can be used when the sink opening, sink thickness, and disposal mounting flange are compatible. Also check the room under the bowl and the outlet height for connecting the disposal to the trap. Before ordering, compare the sink drawing and the disposal manufacturer's mounting requirements with the flange you intend to use.
Workstation & Accessories
Included accessories vary by model and package. A workstation may be offered with a fitted cutting board, drying rack, colander, or bottom grid, and some packages may include drain hardware. Check the selected variant's included-items list before ordering. If an item appears in a photo but is absent from that list, confirm with Akicon whether it is supplied.
Only when their dimensions and support points match the specific sink. Cutting boards and roll-up racks normally fit across the workstation ledge, while bottom grids must match the bowl floor, corner shape, and drain position. Use the sink model number and the accessory drawing to check fit, even if two sinks have the same advertised width.
Akicon sells selected sink accessories separately, and availability varies by model. To find a fitted replacement, provide the sink model or order number and identify the part you need. For a custom sink or an accessory that is not listed online, contact Akicon with the bowl or ledge dimensions and a photo of the original part, if available.
Yes, if your sink deck or countertop has a suitable mounting hole and there is clearance below for the hardware and water connection. Position the rinser so its outlet drains into the bowl, and check that the faucet and other accessories leave enough room to use it. Before drilling a new hole, have your installer confirm the required hole size, mounting thickness, and countertop suitability.
You can select an available finish that coordinates with the sink or faucet. Use a basket strainer for a standard drain connection, or a compatible disposal flange if you are installing a garbage disposal. Verify the opening size, fit with the sink thickness, and disposal mounting system before choosing the finish.
Care & Maintenance
Wash the bowl with warm water, mild non-acidic dish soap, and a soft cloth or sponge. Rinse away food and soap residue, then dry the sink with a soft towel. Avoid abrasive pads, bleach, and acidic cleaners, and remove acidic food residues promptly. If your sink has a protective coating, follow its finish-specific instructions before applying any polish or treatment.
Use warm water, mild dish soap, and a soft sponge or microfiber cloth. Rinse thoroughly and dry after use. On brushed stainless steel, wipe along the grain. Avoid steel wool, abrasive powders, and prolonged contact with bleach or salty residues. For colored, textured, or coated surfaces, follow the model's care instructions before trying a specialty cleaner.
Use a compatible bottom grid to keep heavy cookware from sliding across the bowl, and clean beneath the grid regularly so grit cannot collect under its feet. Rinse after use and dry with a soft towel to limit mineral marks. Avoid dragging metal cookware and using abrasive scouring pads. Use cleaners approved for the sink's exact finish.
For unsealed copper, use mild soap and water, rinse well, and let the patina develop with regular use. Remove acidic food residue promptly to reduce localized light spots, and skip polishing products if you want to retain the aged appearance. If the finish is sealed, follow its coating care instructions and contact Akicon before applying any treatment.
Start by softening the buildup with a warm, damp cloth. Wipe gently with mild soap, then rinse and dry. For stubborn deposits, use only a product approved for the exact surface. Avoid vinegar and acidic descalers on copper and on coated finishes unless the manufacturer expressly approves them. Contact Akicon for finish-specific guidance if the deposit persists.
Bathroom Sink FAQ
Find answers about bathroom basins, vanity fit, compatible faucets and drains, and copper care.
Sink Types & Selection
Akicon's bathroom collection includes handcrafted copper vessel sinks in different shapes and profiles, along with select freestanding designs. Compare the mounting style, outside dimensions, and whether the design has an overflow before choosing. A vessel sink suits a countertop installation, while a freestanding model needs floor space and a compatible plumbing layout.
A copper vessel sink is a basin designed to sit on top of a vanity countertop, with the exterior of the bowl visible. The countertop needs an opening for the drain assembly, and the faucet must reach over the rim and into the bowl. Because the bowl adds height above the counter, consider the finished rim height when selecting the vanity.
A vessel sink sits above the vanity top and exposes the outside of the basin. An undermount sink attaches below the countertop, so the countertop surrounds the opening and the rim sits below the work surface. The two styles require different cutouts, mounting support, and faucet clearances. Confirm the sink is designed for the mounting method before ordering.
Measure the usable vanity width and depth, including space lost to the backsplash and nearby walls. Compare the basin footprint, drain position, room for a faucet, and finished rim height. Also check below the counter for interference with drawers, shelves, or the trap. On a shared vanity, keep enough counter space around each basin for comfortable use.
Dimensions & Installation
Compare the sink's overall width and depth with the usable countertop, then check the inside bowl dimensions and height. For a vessel, add its height above the counter to the vanity height to judge where the rim will sit. Check the drain center and any cutout on the exact product drawing, and give your installer the sink specifications before drilling.
Allow enough room for the full basin footprint plus clearance at the front, back, and sides for installation and cleaning. If the faucet mounts on the deck, leave space for its base, handle travel, and connections below. The required space depends on the bowl and faucet dimensions, so lay out both footprints on the vanity before committing to the counter cutouts.
A tall deck-mounted vessel faucet or a suitably positioned wall-mounted faucet can work. Confirm that the spout clears the rim and reaches far enough into the bowl to direct water comfortably toward the drain area. For a deck mount, check the hole count and deck thickness. For a wall mount, confirm the rough-in position against the actual vanity and sink height.
Match the drain to the sink's overflow configuration. A basin with an overflow needs a compatible overflow drain, while a basin without one needs a drain designed for sinks without overflow. Check the sink's drain opening, mounting thickness, and the drain body's fit range. The advertised top diameter of a pop-up drain may describe the visible cap or flange rather than the hole it fits.
Select Akicon bathroom sinks are made to order. Share the desired shape, outward dimensions, bowl depth, and mounting style, together with the available vanity space. Akicon can confirm whether those changes are feasible for the selected design and document the final dimensions before production.
Materials & Maintenance
Akicon's bathroom sink collection focuses on handcrafted copper basins. Depending on the model, you may find natural or antique copper tones, smooth or hammered surfaces, and sealed finish options. Check the selected model for available combinations. The coating and surface texture affect both how the sink looks and how you should care for it.
An unsealed copper basin can gradually change color with exposure to water, air, and daily use. The change may be more visible where water collects or where the basin is touched frequently. A clear seal helps slow the change while the coating remains intact. Confirm your finish type before choosing care products.
Use a soft cloth with warm water and mild, non-acidic soap. Rinse away toothpaste and soap residue, then dry the basin with a soft towel. Avoid abrasive pads, bleach, acidic cleaners, and unapproved polish. If the sink is sealed, treat the clear coating as the finished surface and follow Akicon's instructions for that coating.
Rinse away soap and toothpaste, then dry the bowl and the area around the drain before water can evaporate. This helps prevent hard-water minerals from collecting on the finish. Wipe light buildup with a soft damp cloth and mild soap. Avoid acidic descalers or aggressive scrubbing on copper unless approved for the exact finish.
The right approach depends on whether you are seeing ordinary patina, mineral residue, or coating damage. Begin with gentle cleaning and drying. If the surface still looks uneven, send Akicon the model, finish, and photos before using a polish, wax, or refinishing product. Polishing can remove patina, and a damaged clear coat may need a different treatment.
Accessories & Support
Check the included-items list for the exact sink or bundle you are ordering. If it does not explicitly list a drain assembly, confirm what comes in the box with Akicon before your installation date. If you need to order a drain separately, match it to the basin opening and overflow configuration.
Yes. Akicon offers bathroom sink drains separately in a range of finishes. First choose the version that matches the basin's overflow configuration and drain opening. Then select a coordinating color and verify the drain mounting dimensions against your sink before ordering.
Check spout height above the rim, horizontal reach into the bowl, handle clearance by the backsplash, and the stream's landing point. A tall spout with very short reach can leave limited handwashing space, and a stream directed at the bowl wall can increase splashing. Compare both specification drawings and have the installer confirm the layout before making holes.
Akicon lists a limited lifetime warranty for eligible custom sinks, subject to the terms for the specific product. Coverage applies to qualifying defects under normal use. Installation errors, misuse, and damage from harsh cleaners are among the exclusions. Keep your proof of purchase and refer to your sink listing and Akicon's warranty terms for the coverage that applies to your order.