Accessories & Hardware Frequently Asked Questions

Find answers about kitchen and bathroom accessories, cabinet hardware, and replacement parts.

Product Types & Selection

Akicon offers kitchen sink drains and strainers, disposal flanges and air switches, dishwasher air gap caps, countertop soap dispensers, faucet deck plates, and cabinet knobs and pulls. Bathroom accessories include pop-up drains for compatible basins. Select faucet replacement parts are available separately. Start with the fixture model and mounting dimensions, then select a finish that works with your installation.

Browse kitchen and bathroom accessories

Kitchen options include basket strainers for a conventional drain and flanges for compatible garbage disposals. Bathroom options include pop-up drains in versions with and without overflow. Compare the actual drain opening, sink thickness, and waste connection. For a bathroom basin, also confirm whether it has an overflow channel before ordering.

Browse sink accessories

A basket strainer catches food scraps at the sink opening and connects to a conventional drain tailpiece. A garbage disposal flange provides the sink-side connection for a compatible disposal mounting assembly. Some disposal flanges have a removable stopper or strainer, but you still need to match the flange to the disposal’s mounting system.

See a 3-1/2-inch disposal flange

An air switch uses a countertop or sink-deck push button connected by a small air tube to a power module below the sink. Pressing the button sends an air pulse that switches the disposal on or off. Check whether you are buying a complete kit or a replacement button and tube, and verify the module rating against the disposal.

Check the single-outlet air switch kit

An air gap cover is the visible cap over a dishwasher air gap fitting on the sink deck or countertop. The fitting provides a physical break in the drain path to help prevent wastewater from flowing back into the dishwasher. When replacing only the cap, match its dimensions to the existing air gap body and keep the vent opening unobstructed.

See a dishwasher air gap cap

Akicon offers built-in sink or countertop soap dispensers, including options sold separately or as part of a faucet set. A typical deck-mounted dispenser has a pump above the counter and a reservoir underneath. Before ordering, check the mounting hole, counter thickness, clearance for the bottle, and whether the exact model refills from above.

Browse kitchen and bathroom accessories

Akicon offers decorative cabinet knobs and pulls in a range of styles and finishes, including hammered copper designs on select items. Knobs are commonly secured with one screw. Pulls often use two mounting holes and are sized by the distance between screw centers. Measure the existing holes and door or drawer thickness before selecting hardware.

Compatibility & Specifications

Some Akicon drains are designed for common U.S. kitchen sink openings, but fit depends on the exact sink and drain assembly. Compare the opening diameter, sink thickness at the drain, underside clearance, and tailpiece or disposal connection. Compact prep sinks and custom sinks may use different dimensions from a full-size kitchen sink.

Check the sink’s specification drawing or measure the actual opening after the old assembly is removed. A 3-1/2-inch opening is common for full-size kitchen sinks, but the visible flange diameter can be larger than the opening it fits. Verify the sink thickness and choose a basket strainer or a compatible disposal flange based on the plumbing below the bowl.

See a 3-1/2-inch disposal flange

Compatibility depends on both the sink opening and the disposal’s mounting design. A 3-1/2-inch sink opening alone does not guarantee fit. Compare the flange, retaining hardware, gasket requirements, and mounting system specified by the disposal manufacturer. For a thick sink, confirm the flange’s usable mounting depth as well.

See a 3-1/2-inch disposal flange

Compatibility depends on the air switch module and the disposal’s electrical requirements, including voltage, load rating, and plug configuration. Compare the disposal nameplate and installation manual with the specifications for the exact switch kit. For a hardwired unit or an uncertain electrical setup, ask a qualified electrician to confirm the appropriate installation.

Check the single-outlet air switch kit

Measure the distance between the outer sink or countertop holes and confirm that the plate fully covers them. Check that the plate’s center opening fits the faucet base and that the plate and gasket sit flat on the mounting surface. Verify the combined thickness against the faucet’s mounting limit and check clearance at the backsplash.

Browse faucet accessories

Spray heads are model-specific. Two heads with a similar appearance can have different threads, seals, hose connectors, or docking shapes. Find the faucet model or SKU and compare the original connection and head shape before ordering. If the faucet has been revised, send Akicon photos of the head and hose connector so support can check the fit.

Some accessories can work across brands when the dimensions, connection, and mounting design match. A standard-size drain may fit multiple sinks, whereas a faucet spray head or disposal flange can depend on a specific connection. Compare both manufacturers’ drawings and confirm compatibility before opening a sealed package or modifying the installation.

Installation & Replacement

Clean the opening and dry-fit the strainer before sealing it. Follow the sink and strainer instructions for the approved sealant, gasket order, and tightening method. Some finishes or sink materials require a specific sealant. Reconnect the tailpiece, fill the basin briefly, then release the water and inspect the underside and trap connections for leaks.

Follow the kit instructions for the mounting hole, button gasket, air-tube routing, and plug-in module. Disconnect power before working around the disposal, keep the tube free of kinks, and use only a properly installed receptacle suitable for the kit and disposal. Have a qualified electrician handle any hardwiring or receptacle changes. Test the button after assembly.

Check the single-outlet air switch kit

Check the mounting hole and counter thickness, and make sure the bottle will clear hoses and cabinet shelves. Fit the gasket and pump body from above, secure the mounting hardware underneath, then attach the bottle and pickup tube as directed. Refill and prime the pump with several presses, and check that the base is secure.

If your model allows top filling, lift the pump head straight out and pour compatible liquid soap into the opening, leaving room for the pump assembly. For a model that fills from below, remove and reinstall the reservoir by hand according to its instructions. After filling, press the pump several times to prime it. Avoid mixtures thicker than the pump is designed to dispense.

Identify whether you are replacing a pull-down head or a separate side sprayer. Hold a pull-down hose while removing the head so the hose does not retract into the spout. For a side sprayer, shut off the faucet supplies and follow the model instructions for releasing and reseating the under-sink connector. Fit the specified seal and test for leaks after reassembly.

Measure the screw-center spacing on a pull or locate the single mounting point for a knob. When drilling new holes, use a template to keep positions consistent and check the back of the panel for clearance. Choose screws that suit the panel thickness and engage the hardware without bottoming out. Tighten by hand to avoid damaging the finish or threads.

Finishes & Maintenance

Selected drains, air gap caps, soap dispensers, and other accessories come in finishes that can coordinate with Akicon faucets or sinks. Compare the finish name, sheen, and product photos for each exact model. A coated accessory and a handcrafted copper sink can have slightly different tones, especially as an unsealed sink develops patina.

Browse kitchen and bathroom accessories

Choose an anchor finish from a visible fixture such as the faucet, then compare cabinet hardware and sink accessories for undertone and sheen. Look at samples in the room’s lighting if available. If you mix finishes intentionally, repeating each finish on more than one item can make the mix feel consistent.

Wipe with a soft cloth dampened with warm water and mild soap. Remove the soap with clean water and dry around seams and mounting bases. Check whether the surface is lacquered, plated, or unsealed before applying anything else. Avoid polishing coated hardware unless the product instructions specifically allow it.

Keep the hardware dry after splashes and promptly wipe away soap, cleaners, and food residue. Avoid leaving damp cloths against the metal. Gentle cleaning helps preserve coated finishes, while unsealed copper or brass can naturally darken with use. Confirm the finish before applying wax or a tarnish remover.

Avoid abrasive pads, steel wool, scouring powders, acidic descalers, and strong solvents unless the finish instructions expressly allow them. Bleach and metal polishes can also discolor or damage certain finishes. Use mild soap and a soft cloth for routine cleaning, then wipe away residue and dry.

Replacement Parts & Warranty

Some parts are sold individually. For example, Akicon lists a replacement air switch button assembly with an air tube. For parts such as a spray head, hose, or dispenser pump, provide your product SKU and a photo so support can confirm whether the component is available separately and fits your model.

See a replacement air switch button assembly

Find the model or SKU on the label, packaging, or order confirmation. Compare the component with the product’s parts diagram if available. Send support photos of the whole fixture, the part, and its connection or mounting points, plus the finish and approximate purchase date. This helps distinguish similar parts and different production revisions.

Availability depends on remaining stock and whether a compatible successor part exists. Contact Akicon with the original SKU, purchase date, and clear photos of the part and connection. Support can check what is available. Confirm any proposed substitute before ordering because similar-looking parts may use different fittings.

Akicon lists different periods by category. For example, its warranty page lists five years for disposal air switch kits and disposal flanges, and three years for soap dispensers, air gap caps, and sink drains. Check the terms for your exact item, especially for cabinet hardware or replacement parts, and keep your proof of purchase.

Check Akicon warranty terms

Contact Akicon support with your order number, item SKU or finish, and the name or quantity of the affected part. Include photos of the item and packaging label for damage, or a photo of the carton contents and parts list for a missing part. Keep the packaging while support checks the order and advises on the next step.